Full-Automatic Continuous Timber Tenon Joining Processing Line
For high-output woodworking facilities seeking unmatched efficiency in structural timber production, our advanced system integrates seamlessly with related configurations like the Full Auto Unlimited Length Wood Tenon Splicing Assembly Line and the Automated Endless Timber Finger Joint Processing Production System. Designed to eliminate bottlenecks and manual handling, this solution embodies the continuous processing concept found in the Uninterrupted Long-Size Wooden Tenon Joint Fully Automatic Line while sharing the robust interlock tenon accuracy of the Auto Continuous Length Wood Interlock Tenon Fabrication Line. The modular architecture allows you to tailor the line exactly to your floor plan and output requirements, making it a future-proof investment for laminated beam, structural finger-jointed stud, and engineered wood component manufacturers.
The Full-Automatic Continuous Timber Tenon Joining Processing Line redefines end-to-end joining with intelligent control and heavy-duty construction. It feeds, profiles, applies adhesive, assembles under high pressure, and cuts to programmed length in a single non-stop workflow. Precision servo-driven spindles produce tight, gap-free tenon profiles that maximize glue bond strength, while the continuous curing and pressing zone ensures every joint meets structural grade standards. Operators can switch between tenon profiles and material dimensions in minutes via the touchscreen HMI, dramatically reducing downtime between batches.
Core Technical Specifications
- Processing width capacity: 60 mm – 300 mm (customizable)
- Timber thickness range: 15 mm – 80 mm
- Minimum infeed length: 150 mm (short block recovery)
- Maximum outfeed length: Unlimited continuous beam
- Tenon types: Horizontal finger joint, vertical finger joint, and wedge tenon
- Joint cycle speed: Up to 12 complete joints per minute (variable speed)
- Glue system: Precision roller applicator with automatic viscosity monitoring
- Pressing force: 15 tons – 40 tons (depending on timber section)
- Main drive motors: 11 kW tenon cutter spindle, 7.5 kW shaping spindle
- Control platform: Siemens PLC with remote diagnostic capability
- Dust extraction requirement: 3500 m³/h at 25 m/s air speed
- Overall line length: Configurable from 14 meters to 35 meters
Performance Data Table
| Parameter | Light Duty Model | Heavy Duty Model |
|---|---|---|
| Max timber cross section | 120 mm x 60 mm | 300 mm x 80 mm |
| Throughput (8-hour shift) | 15,000 – 20,000 m | 8,000 – 14,000 m |
| Installed power | 35 kW | 62 kW |
| Compressed air supply | 6 bar, 400 L/min | 6 bar, 650 L/min |
| Tenon length | 10 mm – 20 mm | 15 mm – 35 mm |
| Glue type compatibility | PVAc, MUF | PVAc, MUF, EPI |
| Machine weight (approx.) | 8.5 tons | 15.2 tons |
| Noise level (at operator position) | ≤ 85 dB(A) | ≤ 88 dB(A) |
Automated board turning, aligning, and crowning stations maintain consistent feed orientation, while the integrated scanner detects knots and defects before the tenon cutter, allowing the system to automatically divert unsuitable blocks. The outfeed section offers optional cross-cutting saws with 0.5 mm repeatability and automatic labeling for inventory management. All critical wear components are manufactured from carbide and hardened tool steel, ensuring long service intervals even in three-shift operations. Safety features include full perimeter light curtains, emergency pull cords along the entire line, and enclosed ducting for dust and fume extraction that exceeds OSHA and European standards.
Related Products
Hot Products
Long Board Fully Automatic Finger Jointer
Long Board Fully Automatic Finger Jointer is a high-end automated woodworking jointing equipment specially developed and customized by Yongqiang Futai Manufacturer for long-sized solid wood boards and complete long boards. It is also a dedicated tooth-jointing equipment in the industry that is suitable for long-board processing, with high stability and efficiency. It mainly addresses the industry pain points such as easy deformation during long-board jointing, misalignment of tooth joints, obvious joints, length limitations, high difficulty in manual processing, and poor production stability.
Short Wood Square-Tooth Finger Jointing Machine
The Short wood square-tooth finger jointing machine produced by Yongqiang Futai Factory is a specialized and automated comb-teeth jointing equipment specifically developed and customized for waste short wood planks, construction waste wood planks, furniture short wood materials, and woodworking edge and corner waste. It integrates automatic feeding, precise comb teeth, quantitative gluing, high-pressure connection, and finished product discharge. It specifically addresses industry pain points such as waste from short wood planks, extremely low efficiency of manual assembly, loose and easily broken joints, misalignment during short and long material connection, high labor costs in the workshop, and low wood utilization rate.
Horizontal Auto Finger Jointing Lines
Yongqiang Futai Horizontal Auto Finger Jointing Lines is widely used in furniture manufacturing, construction engineering, flooring production, wooden door processing and other fields. It is suitable for scenarios such as solid wood short material extension, wood square splicing, finger joint board production, etc., helping customers improve wood utilization rate (increase utilization rate by more than 20%) and reduce raw material costs.
Compact Finger Jointing Lines
Yongqiang Futai focuses on the research and development of Compact Finger Jointing Lines, intelligent manufacturing, and global cross-border supply. It has been deeply involved in the field of solid wood short material extension equipment for many years. Relying on independent research and development technology and refined manufacturing processes, it has launched a compact gear joint production line, which is specially designed for small and medium-sized wood processing plants, small production capacity furniture workshops, waste wood recycling stores, and small factory woodworking processing scenes. It creates a lightweight gear joint processing solution with small land occupation, high efficiency, easy operation, and low cost.
Automatic Finger Joint Shaper
Yongqiang Futai's Automatic Finger Joint Shaper represents the highest level of wood processing technology today. The equipment adopts advanced servo control system and precision mechanical design, which can achieve high-speed and high-precision comb tooth processing of various woods, ensuring perfect matching of each tooth interface. Easy to operate and maintain, it is an ideal choice for modern timber enterprises to enhance their competitiveness.
Semi-Automatic Finger Joint Shape
The China Semi-Automatic Finger Joint Shape produced by Yongqiang Futai is a cost-effective woodworking comb-tooth splitting machine specially developed by the brand for small and medium-sized wood processing enterprises, wood form renovation workshops, and custom furniture factories. It features semi-automatic feeding, precise comb teeth, effortless operation, and durability. It perfectly balances the controllability of manual operation and the efficiency of mechanization, precisely addressing the issues of low efficiency in pure manual comb teeth operation, high procurement costs of fully automated equipment, limited space, and complex maintenance.
- Related Blog
- Reviews
